Call Today

 

We've discovered this great article on How to Install a Shower Drain in a Basement listed below on the internet and felt it made good sense to talk about it with you in this article.

Upgrading a washroom is among the more preferred home enhancement projects. Dealing with the plumbing for draining your shower can be exceptionally easy unless you overdo.

 

 

Handling Your Own Shower Drainpipe Setup Project

You can literally build a collector for your new shower, however you really need to think of it. Do you really want to get involved in the issues of getting the sloping proper, in addition to making certain every aspect of it is waterproof? And I imply every facet! It is much easier to just acquire a pre-cast collection agency online or at your regional Lowes, House Depot or equipment shop. Building one could seem like a great suggestion, yet you will most likely really feel in different ways after a number of hrs.

No matter exactly how you go about obtaining a pan, you should make every effort to make use of one that has the drain situated in the exact same area as the original frying pan. Moving the drainpipe pipelines can be a task, specifically if the contractor utilized an unique framework framework. If you are determined to relocate the drain, you are going to need to reduce the pipe or lengthen it, which might indicate destroying huge pieces of the floor. Put another way, you are going to be looking at a numerous weekend break job.

Thinking we have our drain lined up, the actual link is fairly easy. The drain pipeline need to be facing vertical up to the collector. It will certainly often appear like a "U", which means it functions as a cleanout to maintain nasty smells from coming back up from the drain. To connect the drainpipe, you are mosting likely to create a water tight connection between a drain cap on the top of the pan and the drain pipe. Solutions differ, yet you are generally mosting likely to do this by placing a coupling piece on the top of the drainage pipeline. This is then covered with gaskets and essentially screwed right into the drain cap. The drainpipe cap ought to act as a locknut, to wit, it screws straight onto the combining.

The tricky part of this process is getting your drain cap to match a water tight setting in the frying pan. This is accomplished by withdrawing the drainpipe cap as soon as you make sure every little thing meshes. At that point, you put plumbing professionals putty around the bottom of the cap and after that screw it back on. The putty should develop a limited seal in between the cap and also the shower frying pan, which maintains water from flowing under it as well as into the mounting under the shower.

Undoubtedly, washroom showers can be found in a variety of designs nowadays. If you buy an enthusiast, they often featured plumbing directions or the shop can keep in mind anything uncommon you ought to know. It sounds complicated, yet is typically rather easy. Enjoy!

Whether you are a bath tub or shower individual, most individuals search for shower just choices when purchasing a residence. This easy truth implies greater than a couple of house owners spend a weekend break upgrading or mounting showers in their restrooms. Fortunately for you, it is a relatively straightforward process.

A collector or frying pan describes the horizontal surface area located at the end of the shower. The collection agency generally contains a non-slip surface a little banked towards the facility or any place the drainpipe is located. Integrated with three to four inch wall surfaces around the side, the objective of your shower drain plumbing is to get the water to flow to as well as down the drain.

 

How To Install & Replace A Shower Drain In 5 Steps

 

Replacing a shower drain, or installing one for the first time, often requires a plumber, but if you’re confident in your DIY skills then you may be able to do it yourself. Your new shower drain should come with specific installation instructions, so take time to familiarise yourself with those before you get started. There are several types of shower drain, and the one you choose or are supplied with will depend on your shower tray, your pipes and the manufacturer’s recommendations. All Mira shower trays are compatible with compression-style shower drains, which attach to your home’s drainpipes with compression washers and nuts. Here’s an overview of how to install this type of drain.

 

How to install a compression-style drain

 

Please bear in mind that these are general instructions, and you should refer to the manufacturer’s recommendations to install your shower drain.

 

Trim the drainpipe

 

The drainpipe should come up to 2cm below the lip of the shower drain. You might need to lift the shower base on to mark the right height, and then remove it again before trimming the drainpipe with a hacksaw. Ensure the cut is flat and level.

 

Attach the drain assembly to the shower base

 

Apply silicone caulk to the lower rim of the drain assembly and insert it into the shower base from the top side of the base. This should be done before the base is put in place on the floor. Press the drain assembly firmly into place so that the caulk forms an even seal.

Slide the rubber washer and slip washer on to the drain assembly from underneath the shower base, then thread the drain nut on and tighten it with pliers.

Wipe away any excess caulk that has oozed out.

 

Put the shower base in position

 

Carefully position the shower base so that the drain assembly lines up with the drainpipe and fits inside it. It’s a good idea to get someone else to help out, and it’s usually easier to set the back of the base down first, and then lower the front of the base down.

 

Insert the compression gasket and nut

 

Slide the rubber compression gasket down into the drain opening so that it fits around the drainpipe. The top of the gasket should line up with the top of the pipe, or be slightly lower.

Drop the compression nut into the drain opening and use the fitting tool that will likely have been provided and a screwdriver to tighten the nut. As you tighten it, the gasket will be compressed against the drainpipe, creating a watertight seal.

 

Fit the metal strainer

 

Press the metal strainer into the drain opening, making sure the top surface is lower than the shower floor around it.

And there you have it, a brand-new shower drain! Allow the silicone to set for a full 24 hours before using the shower.

 

Cleaning and maintenance of your shower drain

 

Shower drains can quickly become clogged with hair and a build-up of product, which can lead to bad smells and can prevent your shower water from draining efficiently.

To maintain your shower drain, clear out any strands of hair that gather on the metal strainer after each shower. We recommend cleaning your shower drain thoroughly once a month using boiling water to loosen up soap scum and get things moving.

https://www.mirashowers.co.uk/blog/how-to/how-to-install-replace-a-shower-drain-in-5-steps/

 

I hope you enjoyed our article about How to Install or Replace a Shower Drain. Many thanks for finding the time to read our article. Liked our article? Please share it. Let other people check it out. We love reading our article about Simple Steps for Installing a Shower Base.